I would like to know if there is any documentation stabilishing what the digital_video and audio out slew rates are.
THANKS IN ADVANCE.
Slew rates are dependent on the pin loading which varies from design to design. You can control the slew rate via the DRV_STR registers. To get the real slew rate you will need to model your design using the IBIS files for the 7611, your load chips and the board parameters.
Thanks for the answer.
Is there any documentation for slew rate control instructions? I couldnt find anything for the register "DRV_STR"...
DR_STR for data lines IO 0x14[5:4]
DR_STR_CLK for clock line IO 0x14[3:2]
DR_STR_SYNC for sync lines IO 0x14[1:0]
Retrieving data ...