Is there a max current leakage spec or similar for CLKIN pin? Looking at having an oscillator drive a couple things.
Apology for the delayed response as there were measurements done on the leakage current of AD2S1210 CLKIN pin.
The leakage current was tested at -40, 25, and 125 degrees Celsius. Across this temperature range, it was measured less than 40uA. Typical reading is approximately 15uA when measured at 25 degrees Celsius. Take note that this is only a typical value as getting the maximum value would require full process for limits.
Hope this helps.
We are now working on this. We'll get back to you as soon as we have looked into it.
Retrieving data ...