I, Satyabrata Sarangi, am using AD 600 in a cascading mode to get 80 dB gain. The problem i am facing is always i am getting an amplified output, with a larger bandwidth. If the original signal is of 1 MHz, i am getting a 25-30 MHz signal as output. Why this is happening? Please help me.
I am implementing Fig. 37 (I am giving 1V directly at VG' instead of controlling VG' through the AD590, 2N3904 and 806ohm resistor) of the attached datasheet.
I have attached the datasheet i am following.
Please help me.