i.e. Is that possible to synchronize both ADCs of ADuCM360 and sample two input signals at same time?
To enable, follow these configuration steps:
I am testing the both ADC0 and ADC1 using EVAL-ADUCM360QSPZ.
After finishing the configuration steps you provided, how do I trigger both ADCs to sample at the same time?
If only AdcGo(pADI_ADC0,ADCMDE_ADCMD_CONT) or AdcGo(pADI_ADC0,ADCMDE_ADCMD_SINGLE), ADC1 would not be triggered.
Further information, please.
Setting ADCCFG.15=1 initiates the sampling.
This method of operation isn't supported by the library functions, so for this I would recommend that you write directly to the registers instead of using the functions.
Retrieving data ...