There must be some sort of standard connector used on this interposer board, but I can't find a BOM/Schematic for it. We need to figure out what the mating connector is (and it's pinout) so we can drop one down on the target board.
on the aduc7023 it is J9
The mating connector that we are using for I2C communication is described in the ADuC7023 evaluation board user guide, pages 7 and 14: http://wwwp.analog.com/static/imported-files/user_guides/UG_176.pdf.
The pinout on the USB-I2C/LIN-CONVZ is shown in the document attached.
Ahhhh ... looks like J9 is the same I2C connector used on the USB-!2C serial loader right? Thanks.
Retrieving data ...