I want to use an ADuC 843 as a digital controller for a transmitter design and I need to burn my codes into the uController. how can I do this please?
Figure 35 on page 26 of the ADF4350 datasheet show how to interface the ADuC812/ADuC70xx to the ADF4350. The ADF4350 is programmed via the ADuC843.
To program the ADuC843, simply download the WSD V7.05 application from here: http://www.analog.com/en/processors-dsp/analog-microcontrollers/aduc843/products/EVAL-ADUC842/eb.html#SOFTWARE_AND_TOOLS.
You might also need a serial cable http://www.analog.com/en/evaluation/eval-aduc-cable1z/eb.html to connect the PC to the ADuC843 UART.
For more information on using the WSD : http://wwwp.analog.com/static/imported-files/user_guides/UG-041.pdf
For programming, the ADuC843 is similar to ADuC842 and ADuC841.
The answers in these two threads are also valid for ADuC843:
- Programming the ADuC841.
- About ADuC842 MicroConverter Programming.
Thank you for the reply. how do I use the downloder / debbug cable to write my codes to the ADuC 812 device as well as the ADF4350
Retrieving data ...