Tool: Visual DSP++5.0
I am not able to test usb on bf527 ez-kit using example code.
please help me how to test this and what will be the result of this example code.
Please ensure you have the latest update of VisualDSP++ 5.0, Update 10.1 (available from our website below), as examples for the BF527 EZ-KIT Lite were not added until Update 1.
Then, there are examples provided in "...\Blackfin\Examples\ADSP-BF527 EZ-KIT Lite\Drivers\USB\".
All of the examples include a readme.txt with instructions, and details of the expected output.
Thanks for the reply.
I have tested all codes which are in Examples of BF527 and its working.
How to copy a FAT32 file FROM a USB removable storage disk( like pendrive) which is connected to USB port of blackfin 527 EZ kit TO SDRAM/ L1 memory using these example codes.
We don't have any examples that demonstrate such functionality. If you encounter any issues when you try to implement this yourself, I would recommend starting a new thread, for better visibility.
Is there any example code available to test USB in HOST mode which is non-VDK basis ?
The examples provided in VisualDSP++ are the only examples currently available. The VDK one should be suitable to test host mode, to ensure the interface is working as expected. Note that the underlying device drivers have no requirement for an Operating System to be present, so you should be able to use the Shell Browser example as a guideline for setting up Host Mode for the USB.
Please take a look at the sample code provided in the below link:
Retrieving data ...