ADuCM360: What do Bits [7:5] in the CLKCON0 - Register (CLKOUT) configure, and what for will this clock be used for?
The Mux has only one output, and that output gets configured through CLKCON0[4:3]
The clock out MUX can be used for test/debug purposes only. The clock signal can be brought to an external pin, P0.4. We do not recommend using this test signal as a clock source for an external circuit.
The CLOCK-in MUX (CLKCON0[4:3]} is separate and is shown in figure 3 of the User guide
Retrieving data ...