AnsweredAssumed Answered

Cr/Cb swap

Question asked by subhadra.j on Sep 6, 2012
Latest reply on Sep 13, 2012 by GuenterL


     I'm using ADV7393 encoder and configured the registers for 8-bit 525i YCrCb In (EAV/ SAV), CVBS/Y-C Out . I'm sending a standard color bar data input to the adv7393 in BT.656 format and I'm seeing color issues on the display . (attached the snapshot of the display).  It seems that the Cr/Cb is swapped ..

What I want to find out is, if there is any register setting in ADV7393 which I can configure to swap the Cr and Cb for SD mode ? I would like to try this out and see if the display comes properly.


Kindly let me know.  



from_phone 031.jpg