How can we restrict the bandwidth of ADXL203 to 0.6 to 1.2 Hz only and how can we set the analog o/p scaling to 0 to 1m/sec2?
It looks like this question was missed, and the organization around this forum has undergone several changes ever since. Sorry about that.
You will need to use a bandpass filter at the output for the low frequency cut-off. Select values of Cx and Cy such that Cx = Cy = 5uF/f_3dB (Hz) = 5uF/1.2 = 4.16uF. You cannot change the scale factor on the part.
Retrieving data ...