If i connect 2 ADIS16405 to same SPI bus with different chipselect. When one ADIS16405 is OFF and other is ON, will first ADIS16405 will load the Bus.
Can anyone tell the part number of mating connector(24-pin) of ADIS16405.
When CS is held high on the ADIS16405, the DOUT line will effectively, "let go" of the line by going into a high-impedance, "three-state." I am not able to open the attachment. If you want to me to take a look at this, can you provide it in the form of a PDF? If not, send me a private message with your email and I will send you an address to send this file to. With respect to the mating connector, our evaluation boards use CLM-112-02-L-D-A, from Samtec, but we understand that the MLE series also works well. See Figure 5, on page 8 of the ADIS16405 datasheet (rev B) for this reference.
I hope that helps!
Thank you for your reply. It was a very helpful information. we are placing order for connector with element14.
I have one doubt regarding DIN line what happens when ADIS16405 is OFF. Please find an attachment
Retrieving data ...