Add your comments about the Circuit Note found at www.analog.com/cn0187
How can I reload a calibration file with the SDP evaluation software provided in the kit? Is it necessery to calibrate the ADL5502 every time the software is initiated???
Thank you for contacting us. I have added the feature you requested to the evaluation software and have posted the new release to our public FTP server.
you can download the new version at the following address:
If you need any help using this new feature or need any other support. Feel free to email me.
Thank you very much!
I'll download and test it.
How did the test go?
Thank you for your interest.
I am waiting for a piece of equipment from Agilent to do a better calibration that I was doing until now. As soon as I receive it, I'll start the measurements.
I'll post the impressions to keep you informed.
Thank you for the update!
I've testing the software calibrating the ADL5502 and then loading the calibration file and it goes smoothly.
Should I have any other issues I'll post them here.
Great to hear everything worked out!
I would be very grateful if you could send me the source files for this application and the SDP drivers for Labview so I can modify them and program my own application. Could that be possible? Are these source files available somewhere?
Thank you again for your help.
Unfortunately the source files for the application are not available for distribution as they are meant to be used as an evaluation platform.
If you would like some feature changes made to the program, I can work on them and release a new version.
The feature I want to add is so specific that it has no general interest.
What about the labview drivers for the EVAL-SDP-CB1Z?
I have attached a copy of the source, but we cannot support the SDP Drivers. What you do with this is up to you.
Thank you James,
I really appreciate your help.
Retrieving data ...