We want to interface a BF548 custom board to a PC through USB.
We want to have bulk mode transfer.
On the BF side, the flow charts in the manual are fairly clear.
On the PC side, can u pl describe in detail the procedure to interface to a C program.
There's a Bulk loopback example in VisualDSP++:
For the Blackfin side refer to the example in:
"...\Analog Devices\VisualDSP 5.0\Blackfin\Examples\ADSP-BF548 EZ-KIT Lite\Drivers\usb\bulk_loopback_app"
For the host side refer to the provided hostapp example which can be found in the following VisualDSP++ 5.0 install directory:
"...\Analog Devices\VisualDSP 5.0\Blackfin\Examples\usb\host\windows\hostapp"
Retrieving data ...