I see the note that says the board is not compliant to the Vita57.1 sizing. What are the actual board dimensions?
The AD-FMCOMMS1-EBZ FMC Card is not fully ANSI/VITA 57.1 compatible:
does not meet the mechanical form factor (too tall, too long)
I found a board, and an accurate ruler - for those that can't open the fab drawings - its around 91mm x 69mm - not including the SMA connectors at the end. The FMC spec is 78.8mm x 69mm - so it's just a little (~12mm) long.
The exact size is detailed in the fab drawings. My memory is, it is about 10mm too long, (and does not include the cutouts like the FMC spec indicates) - the mounting holes at the end of the card are in the wrong places, and the SMB connectors violate the height requirements by 6mm.
Retrieving data ...