I was hoping to configure my SRUs without having a target connected, but the expert tool insists that the appropriate target be attached.
Anyone know of a work-around?
This was a known problem with the older version of the plug-in. The correct code should be as follows:
SRU (DPI_PB06_O, MISCB4_I);
This has been fixed on the latest dll file which is available on the website. Can you use the latest revision of the AdvancedExpertDAI plug-in on the website?
Before using the latest one unregister and delete the older version of the dll.
Laz wrote: I was hoping to configure my SRUs without having a target connected, but the expert tool insists that the appropriate target be attached. Anyone know of a work-around?
Unfortunately there isn't a workaround in place for what you wish to achieve. You can only use the AdvancedExpertDAI when connected to your target. You can find information regarding the AdvancedExpertDAI in EE-243 which is available here - http://www.analog.com/static/imported-files/application_notes/EE-243_Rev4_4_15_09.pdf
As a follow up, has anyone else run into a problem with the names from thiis tool not matching the reference H files?
For example, I get the following compiler message:
".\SRU_ADM.c", line 68: cc0020: error: identifier "MISC4_I_REG" is undefined SRU (DPI_PB06_O, MISC4_I);
and the SRU file includes the proper H files from the ADI library (I'm using a 21368):
#include <sru.h>#include <sru21369.h>#include <def21368.h>
A quick search shows that MISC4_I is not a valid name in the H files, it should be MISCA4_I(?).
This happens on a small variety of SRU signal names.
Retrieving data ...