Where can I get the project for LPC MCU of ADE7880 Evaluation board.
I need libary for my MCU for work with ADE7880.
The MCU project comes with the Evaluation board kit and you can find the instructions to order one, at the site I mentioned.
Please let me know if I could help you with anything else.
We have just launched a new Energy Monitoring and Metering Community on EngineerZone to support these products so I have moved your question to that community. Someone here should be able to assist you.
EngineerZone Community Manager
The Evalation board software for all Evaluation boards can be found in the ADI website(www.analog.com) once you search for that particular product.
A link to the ADE7880 Evaluation board details is provided here:
Thank's for the link.
But this link contain only LabView project for GUI. I need IAR project for LPC MCU of ADE7880 Evaluation Board. I need source code for host MCU to work with ADE7880.
Do you have ADE7880 project for other MCU for Fujitsu Cortex M3?
I am afraid I do not have the code for any other MCU, but you must be able to get the idea behind developing the code, using this sample code.
I connected the microcontroller with a SPI interface with ADE7880. I have written to the register AGAIN value and read there FFFFFF?
What is the SPI clock frequency that you are using? Have you tried reading other registers? Do you lock the communication port after selecting SPI for communication purpose( page 73 Serial Interface Choice)? Have you verified if you met all the timing specifications as described in the datasheet( starting from page 7)? Also, you can try monitoring the signals by probing them during SPI reads and writes and check to see where the problem arises from.
Retrieving data ...