I am using Blockbased talkthru with ADSP21371. But I am having hard time enabling the packed I2S or multichannel mode. I want to get output on all eight RCA channels. I will appreciate if someone can send his/her code to me.
Thank you so much for your response. I appreciate it. I have got another problem which is different from the one mentioned above. I am trying to load a program in Flash using STMicro Flash Programmer(ASM) but when I program it, it says linking error stating "Out of memory total of 0x2d40 words were not mapped". Can you help me figure it out?
I will appreciate either your's or someone else's immediate response.
The talkthru code available for ADSP-214xx EZ-Kits use TDM mode to communicate with ADD1939 codec to send the data to all the DACs. For example, you can have a look at the code example "21469 AD1939 C Block-Based Talkthru 48 or 96 kHz" available at the VDSP installation path: "C:\Program Files\Analog Devices\VisualDSP 5.0\214xx\Examples\ADSP-21469 EZ-Board". You can probably use this code as reference to modify the ADSP-21371 talthru code for TDM mode.
I think the ldr file you are using might be too big to fit it the internal memory of the processor. Since you are using EZ-Kit, I think you can instead use the "FLASH Programmer" tool available with the VDSP at the path: "Tools->FLASH Programmer" as shown in the below screenshot:
Please let me know if you need any specific help to be able to use this tool.
Retrieving data ...