I am using CED1z with AD7766, I tried to detect this device in Measurement and Automation Explorer (NI-DAQmx) but this does not showup.
Plz help me out on this issue and tell what the problem may be.
The CED1z does not have an IVI driver, so therefore cannot be detected in Measurement and Automation Explorer.The install provided does contain the necessary device drivers to allow the CED1Z communicate with LabVIEW on the PC through the provided software stack. In the LabView source code you will see calls to our own ADI_CED1a.dll.
Retrieving data ...