This is with regards AD9984A .
HS and VS Sync signals are connected to AD9984A
0x24 is used to detect HS and VS , B7 and B7 toggles between 0 and 1 though SYNC signal are present .
Is it necessary to read it in Loop , if so please let me know if there a recommended way to do this .
Or there are any other ways to do this .
0x24 SyncDetect： B7 HSYNC0 Detection
B6 HSYNC1 Detection
B5 VSYNC0 Detection
B4 VSYNC1 Detection
With best regards and wishes