I would like to use the AD8145 on a single 5V supply. I did not find a reference schematic on how to do that.
Is it correct, that I
- connect VS+ to 5V
- connect VS- to 0V
- GND-Pins to 0V
- use a 2.5V bias (e.g. via 100k) for the (AC coupled) inputs
- connect a 2.5V reference voltage to the REF pins
Can I still can use the comparators (VS+ to GND >= 4.5V)?
What is the input voltage range of the comparator in this case?
Thank you very much for your help!