I would like to know with regards to the HPA / INT2 pin when there is a MUTE .
The setting is as follow but HPA / INT2 100 pin doesnt output .
Please let me know if any other setting is required so that HPA / INT2 outputs .
Reference UG-216：Hardware User Guide
IO 0x41[0~1] output pin 3:HPA ref: P167
IO 0x41 Logic level 0:LowActive ref: P168
IO 0x41 INT2 set to output 1:Out ref: P74
IO 0x4a Enable output 1:Enable ref: P169
When we disconnect the cable the status changes
IO 0x66 Status 1 ref: P176
Please let me know if any other setting is required other than the above setting .
Thanking yo u
With best regards and wishes