I have an input of 1 pps reference to two outputs. A 1 pps and the other 10 MHz How do I set up two profiles for only one reference input and two outputs.
You will only need to setup 1 profile to enable two output frequencies. The profile is a partial setup file which configures the device from the reference input to the DDS frequency. You should set the DDS frequency to a common multiple of your two output frequencies. I recommend setting the DDS frequency to 200 MHz (with a sysclk operating at 1GHz) and configuring the distribution section to have a divide by 20 for one channel to produce the 10 MHz output and a divide by 200e6 on another channel to produce the 1 pps output.
Retrieving data ...