Please let me know voltage value about below pin for decision of voltage proof in capacitor
You can find the design support files for the ADV7403 at http://ez.analog.com/docs/DOC-1635. They include the reference schematic and bom. Any voltage greater then 6.3V should be fine for all the pins listed above. I believe the bom uses 10V and greater for all those pins.
Thank you for your answer.
I have used 10uF, 6.3V Rated capacitor to CAPC2 and CAPY1 pin, in my design. Whether it cause any issue?
I have powered-On the board. I did not find any capacitor damage / fumes on the PCB.
Please suggest me, what will be the exact voltage across CAPC2 and CAPY1 with reference to CAPC1 Reference both.
The voltage seen on the CAPC2 and CAPY1 will be approximately 1.0 V. The voltage onCAP_ADV7403 will not exceed AVDD or 3.3 V. I don't have the exact voltage levels however a 6.3V cap will work fine.
Retrieving data ...