Is it possible to read the Seven Band Level Detector registers via I2C to obtain the values that would be displayed if you were in SigmaStudio?
I note that there is an ON/OFF switch on the level detector, but I don't see a corresponding ON/OFF register when looking at the level detector block in my _PARAM.h file.
I also note there are a lot more registers associated with the seven band level detector in the _PARAM.h file than I would have expected. I expected one register for each band, and there appears to be five registers per band, plus some others.
Here is the seven band level detector from my _PARAM.h file. http://pastie.org/3740261
How do I activate it and read the 7 levels?