I'm designing in a 1701 and need to use TDM in and out, can anyone tell me the correct pinning for TDM in for the 1701?
should I use pin11: MP0 SDATA_IN0/TDM_IN and pin15: MP6 SDATA_OUT0/TDM_OUT ?
The datasheet confuses me:
table 10 at page 11 of the datasheet says:
p10 = MP1 = SDATA_IN0
p11 = MP0 = SDATA_IN1
table 64 at page 46 tells met this:
Multipurpose Pin Function
MP4 INPUT_LRCLK (slave only)
MP5 INPUT_BCLK (slave only)
MP10 OUTPUT_LRCLK (master or slave)
MP11 OUTPUT_BCLK (master or slave)