AnsweredAssumed Answered

AD9912

Question asked by stevesch on Feb 21, 2012
Latest reply on Feb 22, 2012 by DSB

On page 5 of the AD9912 datasheet, under "SYSTEM CLOCK INPUT/SYSCLK PLL Bypassed/Input Resistance" the range is specified as 2.4 to 2.9 kohms differential.  But on page 21, Figure 47 the schematic for "SYSCLK BYPASSES" shows a 500 ohm resistor to RF ground at each of the SYSCLK inputs.  That would result in 1.0 kohm differential input resistance instead of the 2.4 to 2.9 kohms specified in the table on page 5.  What am I missing?  Thanks.  Steve

Outcomes