AnsweredAssumed Answered

Trouble booting with BF533

Question asked by adamh on Feb 13, 2012
Latest reply on Feb 16, 2012 by adamh

I have a custom board with a BF533 booting from SPI Flash (AT25DF081A). I am able to program the flash using the dspFlash programmer from Danville Signal. When I cycle power the BF533 does not boot. PF2 does not drop low and 0x03 is not sent on the MOSI line. I have verified that the boot pins are set to 11 for SPI boot. Is it possible that the boot rom has been corrupted? And if so is there a way to reload the boot rom?