Does anyone have the software operating this evaluation board using a serial port in a PC?
(The software provided in AD site requires usb or SDP connection)
Integer-N PLL software version 5 attached.
This is an older version software with parallel port support.
You will probably need administrator rights to access the parallel port.
The USB support won't work if you have installed any of the newer software.
What layout revision is indicated on the board you have?
The new revision uses the SDP-S connector, which must be ordered separately.
The old board which has a nine pin serial port connector can be used with a USB adaptor. This should have been supplied with the kit. If not let me know.
The board I have was send only with a serial to parallel cable!The program Iused to have to operate it was asking for com or usb connection !No other connection device was send with the evaluation board!!
The above software does not seem to work! Itried to install it in windows Vista and even as Administrator I do not have the program.It only provides pdf schematics for the usb connector and the evaluation board!!!!!!!
Try downloading and installing Microsoft's Windows XP emulator. This installs a virtual Windows XP machine and you install the Integer-N software inside the virtual machine. Free download here: http://www.microsoft.com/windows/virtual-pc/download.aspx
If that doesn't work, you will need to buy a USB adapter board and use it will the v7 software you downloaded from the AD website. Purchase here: http://www.analog.com/en/rfif-components/timing-ics-clocks/eval-adf4xxx/products/product.html#ppa_print_table
Ok thank you i will try it!!!
Please send me your address in a private message and I will send you an adaptor board also.
My e-mail address is email@example.com if you can send me your mail there i will provide you my address
Thank you in advance.
Retrieving data ...