Hi folks,

What is the output voltage compliance range for the AD9114-7 DACs with AVDD = 3.3V? I see where the common mode voltage is -0.5 to +1.2 and the max full scale output current is 20 mA, but I don't see the DAC output voltage range limits. Could I arrange the common mode voltage and output resistances such that the output voltage is 1.0 +/-0.5 V, for example?

Thanks,

Gerrit

what CM and output current should I use for a +/- 0.5 V signal swing? I can set CMLI and Q if necessary.

4ma output current with 1V output CM voltage