Can you please give me a valid C scripts (until receiving a clock generator needed by transceiver) to test my No-Os project using ZC706+AD9371 (I tried without and when I plot the received signals I obtain a false spectrum)
When you run your NO-OS code are you getting any error ?
What do you mean by " until receiving a clock generator needed by transceiver" ,?
Are you using Evaluation board or custom board with out AD9528 ?
Thank you for your reply
No error when I build the No-OS project( with two last version 2018_r1 and 2017_r1) but my problem when I want to generate C scripts from TES GUI (I don't have now clock generator )
Yes I use ZC706 eval board and AD9371
With TES GUI , you need to connect board give reference (30.72 MHz) , program and then generate script. That will include AD9528 scripts.
AD9528 API's are part of API provided in below link.
Transceiver Evaluation Software | Analog Devices
I know that I must connect the transceiver to the reference clock
since I can't do this now please any other solution or if you can give me a valid C scripts
I already have the same file (matched with your attached file)
But when I plot the spectrum of the signals is always false
Can you share the plot what you are seeing.
What signal are you sending and what gain you set in RX ?
Hope the signal level is not too high to saturate the receive.
Here my results
Are you giving 30.72 MHz reference to the evaluation board ? Without that the frequency will not be stable and will have slight drift.
What is the frequency programmed and how much offset are you seeing ?
No I said before I don't have a clock generator to connect it to the transceiver
So this means that I can't test the No-OS project without the clock generator
I thoughbefore that only the TES GUI need the reference clock and once I have a C scripts I don't need it to run my project
I will see the software drivers to verify the programmed frequency
Retrieving data ...