I am using the AD5560 to measure the temperature by making a current of 500 mA.
1: There is a channel which shuts down when measuring 500 mA at 1 Ω resistance and 0.5 V applied voltage.
2: not shut down when measuring 500 mA with resistance 10 Ω, applied voltage 5 V.
1 Ω, the measurement temperature in TSENSE immediately after application is around 75 ° C
When it is 10 Ω, the measurement temperature at TESENSE immediately after application is around 58 ° C
AD5560, depending on the resistance value to be used, is there a short circuit condition, upper limit value, lower limit value etc?
Could you tell me