using the ADV7341 Evaluation Board, I'm triing to visualiza the ColorBar generated internally by ADV7341 over a monitor via CVBS interface (connected at DAC 4) and S-Video interface (conneted at DAC 5 and DAC 6).
I use the Lab View based ADV tool to configure the ADV with the Table 61.
If I put on the CLKIN_A pin a 27MHz clock the Color Bar is reproduced correctly while if I use 27,027MHz clock the Color Bar is reproduced in Black&White. In this case, I have tried to change the SUBCARRIER FREQUENCY (registers 0x8C,0x8D,0x8E,0x8F) to adjust the carrier frequency but I didn't find the correct value to obtain a clear Color Bar.
So, how I can use correctly the expression listed on page 56 of the datasheet? Or, is there another solution/via to resolve my problem?