I have my ADRV9361 SoM on the ADRV1CRR-BOB that I've acquired form the link. For prototyping purposes I would like to bring in an external clock to the AD9361. I found this pin on JX4-63, net name AD9361_CLK. When I went to follow this pin on the Break-out Carrier, first I saw in the schematic and board files info I found here that the JX4-63 is just a pad and has no trace. Okay, fine, so I'll carefully add a wire for now.
However, on the board I purchased from Digikey, I can see a via next to the JX4-63, which does not seem to be present in the Allegro board file on the link above. I am reluctant to attach a wire if I don't know where the via/trace goes. Does anyone know where the correct documentation is for my board, or perhaps can answer where this net may go? The markings on my BOB are "BD-PZSDRCC-BRK-G" and below that "08-039931 REV C".