I using ADN4650 for LVDS application , In datasheet it is mentioned that the cable can be used for a few meters. What is the maximum cable length can be used and what type of cable can be used.?
Even standard CAT5E cable can be used, but distance will be maximized with higher quality cable intended for high-speed signaling, for example SATA/eSATA, USB, HDMI, etc.
It's application dependent (does the final receiver have equalization for example, or how much jitter can it tolerate?) but 1 to 3 metres (per the different protocols above) would seem a realistic target at 600 Mbps. Maybe more at lower data rates.
Some cables like simple ribbon cables would be intended for <1 metre, maybe just 30-50 cm.
It depends too how good the PCB layout and termination is, and the type of connector used.
Retrieving data ...