Is there a maximum voltage that the AD9162 can handle on it's output pin? If the PCB design results in the voltage at it's output pin being ~6V, would it damage the DAC?
the absolute maximum rating for OUTPUT± to VNEG_N1P2 is "−0.3 V to VDD25_DAC + VNEG_N1P2 + 0.2 V" (datasheet needs to be corrected since it just shows "−0.3 V to VDD25_DAC + 0.2 V" which is not correct). That is, typically any voltage beyond 3.9V might damage the device.
Retrieving data ...