Can you kindly help to check the output power of AD9361 in below condition, thank you.
1) 1.8G, maximum gain
2) 2.6G, maximum gain
Please refer datasheet
Thank you for the support.
Yes we have learnt the diagram before, is there any detail DEMO testing data can share to us,especially working with the maximum gain.
What is your application.?
Above diagram is for a tone. According to your modulation (PAR) you need to back off for actual signal .
We recommend you test on a an evaluation platform for your use case for more clarify.
Thank you for your advice, our application is LTE communication.
Can you help to check the detail test condition of above diagram at 1.8g and 2.4g points.
I can only find description on page 4 "1 MHz tone into 50 Ω load", does 1Mhz means the bandwidth of single tone.
Tone means CW signal , just a sine wave and 1 MHz tone means the CW tone is spaced 1MHz away from LO or center frequency.
Retrieving data ...