AnsweredAssumed Answered


Question asked by karthi-96 on Apr 23, 2018
Latest reply on Apr 26, 2018 by karthi-96

We use zedboard+FMCOMMS2 board.We downloaded the HDLdrivers and no-OS drivers.In our first step we want to pass the sinusoidal signal samples to DAC and mixing that signal with 70MHz carrier in AD9361. We did the following customization to the no OS drivers. i)main.c, the default_init_param parameters are configured as per our requirements

and ii) we enabled Xilinx_platform and console commands in config.h.We are not able to run the no-OS drivers. The following error message is seen in the error window


please guide

i) how to clear the error

ii) where we can find, "how to use the no-OS driver for AD9361"