I am using AMDP504 as the input detector for a stethoscope design. Do we have any stethoscope cone housing recommendation that can be suitable for this mems part?
EngineerZone doesn’t currently provide a support community for this particular Analog Devices product. If you still need help with this, I would suggest submitting your question to the Analog Devices support team in your region. You can find the appropriate support contact on our website at: http://www.analog.com/support
Thanks Craig. I have also enquired through cic email enquiry…
Avnet Asia Pte Ltd
DID : +65 6580 4741
Mobile : +65 9367 8521
From: CraigG email@example.com
Sent: Monday, 12 December, 2011 4:46 PM
To: Chia, Adrian
Subject: New message: "Using ADMP504 as part of the stethoscope"
Analog Devices EngineerZone<http://ez.analog.com/index.jspa>
Using ADMP504 as part of the stethoscope
reply from CraigG<http://ez.analog.com/people/CraigG> in Products without a Support Community - View the full discussion<http://ez.analog.com/message/38265#38265
Retrieving data ...