I received a question about AD9173 from pur customer.
Can we combine the signal of CAHNNEL 0, 1 and 2 about AD9173? If yes, what registers should be controled?
You would need to set the AD9173 in JESD mode 2 (which sets up clocking to the 3 DAC channels, note M=6 for JESD204B params) and enable/configure the three channel NCO's to the desired Fchan's. The outputs are then summed into the main path, which has another NCO to upconvert the three channels up to the band of interest. This is for DAC0 - the same is true for DAC1 if you configure mode2 as a dual-link. See tables 15 and 16 in the datasheet.
Thank you for your support.
Thanks & Regards,
Retrieving data ...