In the datasheet of AD9375 radio transceiver, it seems that DPD is optimized to 10W average output power. Can DPD be utilized for 20W or higher outputs? Would it be any problem if DPD is utilized out of the range mentioned in the datasheet
Yes, The recommended operating power is 0.1 to 10 W.
As the DPD performance depends on PA behavior, you can test your requirement on evaluation platform. If you are operating above 10 watts there could be limitation on the ACLR correction you get with DPD.
Please find below link for DPD tests results for PA with larger power.
Please refer to the below link for more information on DPD.
Retrieving data ...