I have purchased ADE5169 for a project on power monitor. The data sheet not provide application example on that. Please guide me to program the IC and how to interface the LCD and the 8052 microcontroller.
ADE5169 is a simple I2C/SPI programmable device and the programming guide can be find on the datasheet (page 39 - "Access to internal energy measurement registers")
There is no easy way to interface directly the internal MCU (8052) with a LCD so I would suggest you to place inbetween a microcontroller (like in the AN-564) or to use the FP15 to FP0 pin (page 106 ).
Which LCD do you plan to use?
The LCD module plan to use is I2C 1602 module.
I have encounter some problems when work with the ADE5169;
Hi Praveen0. I will recommend you to intepose a ucontroller between ade5169 and the lcd 1. the intermediate circuits is explained in UG-061. You should pay attention on the AGND and DGND since your input signal could not exceed ±500 mVpeak2. the device is programmed through spi or i2c3. we provide the datashet and the user guide UG-061. Is there any particular subject you are interest in?
Retrieving data ...