Page 47 of the data sheet states that "the ADC filter MMR is a 16-bit register that controls the speed and resolution of both the on-chip ADCs."
Is there no way to set different SF values for the main and aux ADCs?
No both ADCs can only run at the same frequency or better to say filter setting. What do you intend to do?
I.e. one idea if you need one ADC running at a higher rate and the other on a lower rate, possibly you may run both at the higher rate and add a SW filter to the "slower" ADC to achieve better results.
In a future product we may offer this capability - you may contact our local support.
Retrieving data ...