is AD-FMCOMMS5-EBZ compatible with Xilinx zcu102?
Well yes it is kind of - we have tested it and you can find the device tree here:
linux/zynqmp-zcu102-rev10-ad9361-fmcomms5-ext-lo-adf5355.dts at jesd204_ultrascale · analogdevicesinc/linux · GitHub
The issue is a mechanical conflict with one of the larger inductors on the ZCU102 close to the FMC header.
We used an AES-FMC-EXT-G FMC Extender which adds an additional 12 mm of mating height between an FPGA Carrier Card and an FMC Daughter Card.
ZCU102 is not supported.
Supported platforms can be found in below link.
Prerequisites for AD9361/AD9364 based boards [Analog Devices Wiki]
I have seen the table in the provided link, I think it is not updated (last updated on 31 Jul 2013 20:39) because AD-FMCOMMS2-EBZ supports zcu102 (updated on 14 Feb 2018 15:15) which is not present in table. the link is:
AD-FMCOMMS2-EBZ Zynq UltraScale+ MPSoC ZCU102 Quick Start Guide [Analog Devices Wiki]
Is there any chance AD-FMCOMMS5-EBZ also support zcu102?
Moving to Linux SW Forum for comments.
I have seen the below link:
hdl/projects/fmcomms5/zcu102 at master · analogdevicesinc/hdl · GitHub
This mean FMCOMMS5 is compatible to zcu102?
Retrieving data ...