AnsweredAssumed Answered

Bootable image for Zedboard (AD-FMCOMMS4-EBZ)

Question asked by Orlando on Feb 21, 2018
Latest reply on Feb 21, 2018 by mhennerich

Hi,

I have been experiencing some issues when trying to generate a bootable image for Zedboard using your FCOMMS2 (as we are using your AD-FMCOMMS4-EBZ)  reference project. I have cloned the repository you provide with the hardware reference design at https://github.com/analogdevicesinc/hdl/tree/hdl_2015_r2, but after executing the given makefile (at hdl/projects/fmcomms2/zed/) I end up with a bitstream much smaller than expected for zynq 7020 (~2.5 MB vs the expected ~3.9 MB). After generating the boot.bin with the fsbl and linux image you provide, the linux image boots correctly and displays a GUI, but the connected FCOMMS4 board is never recognized.

If I use the boot.bin image you provide directly, instead of trying to generate my own with your hw reference design, everything works fine.

 

Thanks

Outcomes