My customer is using ADF4350 for clock source of AD9914.
In this case, is it possible to remove ADCLK925 ?
Please advise about the configuration.
Thanks in advance.
The ADCLK925 on the AD9914 evaluation board was used as a buffer for the reference clock, convert single-ended reference clock to differential, and to output the same reference clock on TRIGGER OUT. I'm not that familiar with the ADF4350, but I think you can still use the ADCLK925 on the AD9914 evaluation board if the output from the ADF4350 would be single ended or you can remove the ADCLK925 and just use the ADF4350 directly. Just take note of the proper input and output termination requirements indicated on the data sheet of these parts.
Retrieving data ...