Hi, dear colleagues!
There was a trouble with eval board AD9161-FMCC-EBZ and ADS7-V2 - with Configuration #1. There is no switching from on-board clock source (ADF4355) to external clock.
Hardware setup is done by description
Configuration #1: Use external signal generator as clock source
After setting, the output HMC849 was cheked and it was defined, that so no high logic level on output Vctrl at different programm settings, but the required state is a high level (for external clock commutation).
Could You clear, what's wrong? Is the board working good? Are there any errors in software?