200kHz > Fsw < 1MHz according to data sheet, but EMC problems fixed by reducing Fsw. Initial trials satis but what are the reliability issues arising?
UKFAE: I heard back from the designer on your request
I think it would be fine for ADuM4070 to operate at 120kHz. The internal circuit will support this low switching frequency. However, the customer must be careful when designing the DC/DC converter. For example, a bigger inductor would be preferred to limit the peak current and limit the loop bandwidth.
Also I think the electrical parameters in the datasheet might not be guaranteed. The customer might be characterizing the converter by themselves.
Alternatively, there are techniques that can help reduce emissions when using the ADuM4070, which include the use of a safety capacitor from GND1 to GNDISO, and the use of RC snubbers as seen on the attached circuit.
I will check with the designer about his opinion on your request.
Thank you, much appreciated - David
Retrieving data ...