How to get value of AD9361 registers value? from Terminal Commands. in help register? is given but its not working.
also how to set the value of AD9361 Registers in no-os flow.
Have a look here: AD9361 No-OS Software [Analog Devices Wiki]
We don't recommend direct writing to registers - try to always use the API.
What exactly do you want to do?
We want to enable PN and BIST but we dont found command for that.
Have a look in this case at the driver: ad9361_bist_prb() for example can be used to enable/disable the BIST.
Hello Dragos ,
thank you for the reply, is there any function available to disable Half band Filters?
The HB filters are automatically enabled/disabled when a sampling rate is set (ad9361_set_rx/tx_sampling_freq()).
If you are interested about the FIRs too, you should have a look here: MATLAB Filter Design Wizard for AD9361 [Analog Devices Wiki]
when your enable Terminal Commands in your appliacitons. you could type the register you want to read in SDK console.
can you tell me the exact format need to be write in console for register access?
Thanks & Regards
use register?addr -> ex: register?0x014
Retrieving data ...