I have a quesion about ADI Requied setting in the ADV7611 Register Settings Recommendations Revision 1.5.
In ADV7611 Register Settings Recommendations Revision 1.5 Page 5, here is a recommended settings as below:
The registers from 0xC1 to 0xCC are set by 0x01 as ADI required.
However, in another document ADV7611 SOFTWARE MANUAL Rev.A, I do not find the meanings of these registers in HDMI registers map section from page10 to page 13. In this section, the register address is from 0x00 to 0x96.
I am wondering what these required setting mean. Where can I find the detail explaination of these registers, or I just misunderstand something.
Thanks for your support!