AnsweredAssumed Answered

AD7091R-8 Question

Question asked by HOD on Dec 26, 2017
Latest reply on Feb 13, 2018 by jcolao



I have a question AD7091R-8.


【Question 1】
What happens to the conversion result if I repeat the above sequence during sequencer operation?
At this time, reset is not performed.

[Situation that is occurring]
Search result data is acquired with 0xFFF.
The Channel ID will be returned correctly.
There are no alerts.
Example: Return value of Channel 0 = 0x0FFF



【Question 2】
Settings other than Ox0CFF (Channel Register setting) and 0x00FF (Read command setting) and NOP are set for this device after startup.
For example, initial setting register setting etc is not set especially, but is there a problem?



Best Regards